The S8 LED Light Bar by Baja Designs comes with a few new perks that are designed to improve performance and take your lighting game to the next level. The light bar boasts a clean aluminum frame and a strip of LED lights that deliver 6,350 lumens of pure power while only drawing about four amps of electricity. The LEDs last for roughly 50,000 hours, which is a lot of drive time! Let The Scientists of Lighting help you improve vision in low-light conditions with our own S8 LED Light Bar. When you need a light that will last, you need the S8 LED Light Bar. The S8 delivers high-performance lighting and features proprietary reflectors as well as an amber backlit feature and a unique scalloped housing design. The housing is made from aircraft-grade aluminum, with a hard-anodized finish. The lens of the light is made from a hard polycarbonate material and the entire unit is weather-resistant. The lights come with a mounting bracket. This harness is all you will need to in order to get full versatility and functionality from your LP9 or LP6 lights! Wiring harness with plug and play Deutsch style connectors. Built in splitter to power two LP9 or LP6 Lights. Large automotive style ring terminals. 3-position, 30amp DC Rated, DPDT, On-Off-On Switch to operate high and low beam independently. Extra wire lead with splice connector to operate amber daytime running light (DRL). 20A/40A Relay & 30 amp inline fuse. 12 foot length for battery to instrument cluster. 15 foot length for instrument cluster to light mounting location. Lumens: 12,700 Utilizing 16 Cree LEDs. Wattage/Amps: 120W / 8.00A. Dimensions: 20″ x 3″ x 1.6. Weight: 4.5 lbs. Mating Connector: DT06-4S Deutsch. LED Life Expectancy: 49,930 Hours. Front Lens: Hardcoated Polycarbonate. Housing: Hard Anodized Machined Aluminum. Bezel: Billet Machined Aluminum. Hardware & Bracket Material: Stainless Steel. Exceeds MIL-STD810G (Mil-Spec Testing). IP69K (Waterproof up to 9ft & Pressure Washable). IK10 Compliant (Mechanical Impact Testing). S8 20 Spot LED Light Bar. Rudy’s Bumper Light Bar Bracket. 2021+ Ford Bronco W/ Steel Bumpers ONLY. Will NOT fit Bronco Sport models. Will NOT Fit Broncos with Plastic Bumpers. This model comes equipped with a Toggle switch style wiring harness. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
Baja Designs’ latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 31,750 lumens of pure power, low amp draw of 20 amps, and nearly 50,000 hours of LED life. The S8 also features high performance, proprietary reflectors, an amber backlit feature, and a unique scalloped housing design. LED Life Expectancy: 49,930 Hours. Bezel: Hard Anodized Cast Aluminum. Front Lens: Hardcoated Polycarbonate. Lumens: 31,750 Utilizing 40 Cree LEDs. Housing: Hard Anodized Cast Aluminum. Waterproof up to 9ft & Pressure Washable. CopperDrive® – Only LED Driven At 100%. UService® – Replaceable Lenses And Optics. Hardware & Bracket Material: Stainless Steel. 5000K Daylight – Less Driver Fatigue, Natural Color. ClearView® – All The Light, Right Where You Need It. MoistureBlockT – Waterproof, Rain Proof, Submersible. Some Modifications Maybe Required. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
The S8 LED Light Bar by Baja Designs comes with a few new perks that are designed to improve performance and take your lighting game to the next level. The light bar boasts a clean aluminum frame and a strip of LED lights that deliver 6,350 lumens of pure power while only drawing about four amps of electricity. The LEDs last for roughly 50,000 hours, which is a lot of drive time! Let The Scientists of Lighting help you improve vision in low-light conditions with our own S8 LED Light Bar. When you need a light that will last, you need the S8 LED Light Bar. The S8 delivers high-performance lighting and features proprietary reflectors as well as an amber backlit feature and a unique scalloped housing design. The housing is made from aircraft-grade aluminum, with a hard-anodized finish. The lens of the light is made from a hard polycarbonate material and the entire unit is weather-resistant. The lights come with a mounting bracket. This harness is all you will need to in order to get full versatility and functionality from your LP9 or LP6 lights! Wiring harness with plug and play Deutsch style connectors. Built in splitter to power two LP9 or LP6 Lights. Large automotive style ring terminals. 3-position, 30amp DC Rated, DPDT, On-Off-On Switch to operate high and low beam independently. Extra wire lead with splice connector to operate amber daytime running light (DRL). 20A/40A Relay & 30 amp inline fuse. 12 foot length for battery to instrument cluster. 15 foot length for instrument cluster to light mounting location. Lumens: 12,700 Utilizing 16 Cree LEDs. Wattage/Amps: 120W / 8.00A. Dimensions: 20″ x 3″ x 1.6. Weight: 4.5 lbs. Mating Connector: DT06-4S Deutsch. LED Life Expectancy: 49,930 Hours. Front Lens: Hardcoated Polycarbonate. Housing: Hard Anodized Machined Aluminum. Bezel: Billet Machined Aluminum. Hardware & Bracket Material: Stainless Steel. Exceeds MIL-STD810G (Mil-Spec Testing). IP69K (Waterproof up to 9ft & Pressure Washable). IK10 Compliant (Mechanical Impact Testing). S8 20 Work Scene LED Light Bar. Rudy’s Bumper Light Bar Bracket. 2021+ Ford Bronco W/ Steel Bumpers ONLY. Will NOT fit Bronco Sport models. Will NOT Fit Broncos with Plastic Bumpers. This model comes equipped with a Toggle switch style wiring harness. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
The S8 LED Light Bar by Baja Designs comes with a few new perks that are designed to improve performance and take your lighting game to the next level. The light bar boasts a clean aluminum frame and a strip of LED lights that deliver 6,350 lumens of pure power while only drawing about four amps of electricity. The LEDs last for roughly 50,000 hours, which is a lot of drive time! Let The Scientists of Lighting help you improve vision in low-light conditions with our own S8 LED Light Bar. When you need a light that will last, you need the S8 LED Light Bar. The S8 delivers high-performance lighting and features proprietary reflectors as well as an amber backlit feature and a unique scalloped housing design. The housing is made from aircraft-grade aluminum, with a hard-anodized finish. The lens of the light is made from a hard polycarbonate material and the entire unit is weather-resistant. The lights come with a mounting bracket. This harness is all you will need to in order to get full versatility and functionality from your LP9 or LP6 lights! Wiring harness with plug and play Deutsch style connectors. Built in splitter to power two LP9 or LP6 Lights. Large automotive style ring terminals. 3-position, 30amp DC Rated, DPDT, On-Off-On Switch to operate high and low beam independently. Extra wire lead with splice connector to operate amber daytime running light (DRL). 20A/40A Relay & 30 amp inline fuse. 12 foot length for battery to instrument cluster. 15 foot length for instrument cluster to light mounting location. Lumens: 12,700 Utilizing 16 Cree LEDs. Wattage/Amps: 120W / 8.00A. Dimensions: 20″ x 3″ x 1.6. Weight: 4.5 lbs. Mating Connector: DT06-4S Deutsch. LED Life Expectancy: 49,930 Hours. Front Lens: Hardcoated Polycarbonate. Housing: Hard Anodized Machined Aluminum. Bezel: Billet Machined Aluminum. Hardware & Bracket Material: Stainless Steel. Exceeds MIL-STD810G (Mil-Spec Testing). IP69K (Waterproof up to 9ft & Pressure Washable). IK10 Compliant (Mechanical Impact Testing). Amber 20 S8 Wide Driving LED Light Bar. Rudy’s Bumper Light Bar Bracket. 2021+ Ford Bronco W/ Steel Bumpers ONLY. Will NOT fit Bronco Sport models. Will NOT Fit Broncos with Plastic Bumpers. This model comes equipped with a Toggle switch style wiring harness. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
Style, fitment, performance, and ease of installation. This kit is designed for the Ford Bronco enthusiast that is looking to light up the trail with ample light, and differentiate yourself from the pack. This kit specifically utilizes a set of LP6 Spot Lights. The Rudy’s brackets used to mount this light setup ensure no cutting or drilling are needed, and the wiring that is included will allow for the lights to be operated from upfitter switches in the cab. This is a comprehensive kit and does not require any additional parts for installation. The LP6 Pro is a 6-inch powerhouse featuring a total of 10,300 lumens and a 200° spread of useable LED light. The LP6 features 8,600 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP6 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks – drastically improving cooling capacity and performance. With an amber day-time running light, low power, and high power mode, the LP6 will fulfill all your lighting needs. This harness is all you will need to in order to get full versatility and functionality from your LP9 or LP6 lights! Wiring harness with plug and play Deutsch style connectors. Built in splitter to power two LP9 or LP6 Lights. Large automotive style ring terminals. 3-position, 30amp DC Rated, DPDT, On-Off-On Switch to operate high and low beam independently. Extra wire lead with splice connector to operate amber daytime running light (DRL). 20A/40A Relay & 30 amp inline fuse. 12 foot length for battery to instrument cluster. 15 foot length for instrument cluster to light mounting location. Forward Projecting Lumens: 8,600 Utilizing 6 LEDs. Forward Projecting Wattage/Amps: 90W / 6.5A. IPT Lumens: 1,700 Utilizing 4 LEDs. IPT Wattage/Amps: 15W / 1.0A. Backlight Wattage/Amps: 4.14W / 0.3A. Dimensions: 6.5″ Height / 6.5″ Width / 3.2 Depth. Mating Connector: DT06-4S Deutsch. LED Life Expectancy: 49,930 Hours. Front Lens: Hardcoated Polycarbonate. Housing: Hard Anodized Machined Aluminum. Bezel: Billet Machined Aluminum. Hardware & Bracket Material: Stainless Steel. Exceeds MIL-STD810G (Mil-Spec Testing). IP69K (Waterproof up to 9ft & Pressure Washable). IK10 Compliant (Mechanical Impact Testing). (2) LP6 Pro Spot. Toggle Style Wiring Harness. Rudy’s Bumper Light Bracket. 2021+ Ford Bronco W/ Steel Bumpers ONLY. Will NOT fit Bronco Sport models. Will NOT Fit Broncos with Plastic Bumpers. This model comes equipped with a Upfitter switch style wiring harness. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
Two is always better than one, right? We think so, which is why we’re offering a pair of XL80 LED auxiliary lights with wiring harness for one low price. Take your off-road lighting to the next level with BD’s XL80. In terms of sheer power-to-size, few lights match the XL80. Four Cree LEDs inside push out 9,500 lumens of brilliant illumination. The combination of 9,500 lumens per light and a small profile makes them a fantastic option for forward-projection lighting. The XL80 offers a 20 percent dimming feature, a powder-coated housing and an anodized bezel for long-term durability. The XL80 features a powerful LED for greater visibility and increased brightness. Both the driving and cornering LED lights come in an optional amber color for use as running lights or fog lights. Powder Coated Cast Aluminum. Waterproof up to 9ft & Pressure Washable. UService – Replaceable Lenses And Optics. CopperDrive – Only LED Driven At 100 Percent. ClearView – All The Light, Right Where You Need It. 5000K Daylight – Less Driver Fatigue, Natural Color. MoistureBlock – Waterproof, Rain Proof, Submersible. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
Two is always better than one, right? We think so, which is why we’re offering a pair of XL80 LED auxiliary lights with wiring harness for one low price. Take your off-road lighting to the next level with BD’s XL80. In terms of sheer power-to-size, few lights match the XL80. Four Cree LEDs inside push out 9,500 lumens of brilliant illumination. The combination of 9,500 lumens per light and a small profile makes them a fantastic option for forward-projection lighting. The XL80 offers a 20 percent dimming feature, a powder-coated housing and an anodized bezel for long-term durability. The XL80 features a powerful LED for greater visibility and increased brightness. Both the driving and cornering LED lights come in an optional amber color for use as running lights or fog lights. Powder Coated Cast Aluminum. Waterproof up to 9ft & Pressure Washable. UService – Replaceable Lenses And Optics. CopperDrive – Only LED Driven At 100 Percent. ClearView – All The Light, Right Where You Need It. 5000K Daylight – Less Driver Fatigue, Natural Color. MoistureBlock – Waterproof, Rain Proof, Submersible. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
Baja Design’s latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 19,050 lumens of pure power, low amp draw of 12 amps, and nearly 50,000 hours of LED life. The S8 also features high performance, proprietary reflectors, an amber backlit feature, and a unique scalloped housing design. LED Life Expectancy: 49,930 Hours. Bezel: Hard Anodized Cast Aluminum. Front Lens: Hardcoated Polycarbonate. Lumens: 19,050 Utilizing 24 Cree LEDs. Housing: Hard Anodized Cast Aluminum. Waterproof up to 9ft & Pressure Washable. CopperDrive® – Only LED Driven At 100%. UService® – Replaceable Lenses And Optics. Hardware & Bracket Material: Stainless Steel. 5000K Daylight – Less Driver Fatigue, Natural Color. ClearView® – All The Light, Right Where You Need It. MoistureBlockT – Waterproof, Rain Proof, Submersible. Some Modifications Maybe Required. Please note that this light does NOT include a harness and the applicable harness to this light is 640122. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
The Bronco is a great platform to plan your next adventure around which is why we thought it might be necessary to offer enthusiasts a superior lighting solution. This lighting kit includes a pair of Squadron Pro LED auxiliary lights in spot, along with a set of wide cornering, and driving/combo lenses in the case you would like to change the pattern to a more near-field orientation. The accessories included in this kit are a upfitter style harness, and hardware. The installation process of this kit is extremely simple and does not require any cutting or drilling. No cutting or drilling required! Lumens: 4,600 Utilizing 2 types of Cree LEDs. Wattage/Amps: 40W / 2.90A. LED Life Expectancy: 49,930 Hours. Front Lens: Hard Coated Polycarbonate. Housing: Powder Coated Cast Aluminum. Bezel: Billet Machined Aluminum. Hardware & Bracket Material: Stainless Steel. Exceeds MIL-STD810G (Mil-Spec Testing). IP69K (Waterproof, Submersible to 9ft). IK10 Compliant (Mechanical Impact Testing). UService® – Replaceable Lenses And Optics. ClearView® – All The Light, Right Where You Need It. MoistureBlockT – Waterproof, Rain Proof, Submersible. CopperDrive® – Only LED Driven At 100%. 5000K Daylight – Less Driver Fatigue, Natural Color. Squadron Pro, Pair Spot LED. X2 Squadron Wide Cornering, Clear Lenses. X2 Squadron Driving/Combo, Clear Lenses. Will NOT fit Bronco Sport models. This model comes equipped with an toggle switch wiring harness. The address on your account MUST be verified. All of our parts and accessories are returnable and refundable. The item MUST be unused, uninstalled, in the original packaging and in brand new condition. We value your business and we are not satisfied unless you are. Welcome to Max Flow Motorsports.
